Welded
M.S 1 No's pillar consisting mild
steel plate of 20 mm.
•
Vertical
travel operated by 1 HP motor, gearbox,
screw & C.I.Nut with timers system
for taking depth of cut.
•
Saw
shaft fitted with 2 taper rollar bearing
32309 front and 414/418 rear for taking
heavy load.
•
Internal
diameter of the front bearing 45 mm
& back bearing 38.1mm
•
Horizontal
Travel operated by 0.5 HP brake motor,
gearbox, screw and brass nut for long
life with counting system through
encoder for taking horizontal size.
•
Saw
rotation manual by worm wheel &
shaft assembled with 2 taper rollar
bearing & small shaft
•
Welded
M.S Table of 'C beam size: 2.43 m
x 0.91 m. (Cast Iron Table is also
possible)
•
Table
Travel on 4 No's Wheel assembled with
shaft and 6208 bearing (internal diameter
of bearing IS 40 mm) for taking heavy
load with easy movement.
•
Table
travel by rack and pinion system assembled
with gear, 2 HPAC variable speed motor
for different speed of table and 2
No's limit switch for manage for length
of movement of table.
