Technical Detail   MACHINE  D 30 Spindle Motor  50 HP/37Kw Blade  2.5m Vertical Travel  1.00m Sawing Depth  0.975m Horizontal Travel  5.00m Sawing Length  3.00m Horizontal Travel Speeds   0.50m to  6m/mn
Car   Table  2.54 m x 1.37m Traverse  Motorised     Option   Sawing Length   3.80m Automatic Car For fully computerized machine and car turn table  Follow Up Cuts
Technical Features • Welded M.S beam consisting of mild steel plate of 20 mm.  •  2 No's M.S, V-Type calibrated bar of 50 mm screwed on square groove flat. • Welded M.S Blade carriage consisting of mild steel plate of 20 mm. • Welded M.S Blade carriage running on V-Type rail through 4 No's V-Type wheel set for fine performance for long life. • Horizontal travel by rack & pinion with 3 HP AC/Dc drive motor & gearbox for variable speed for feedly. • Welded 2 No's 8’height pillar consisting of mild steel plate of 20 mm for vertical travel. • Vertical travel operated by 5 HP motor through gearbox & screw & C.I.nut for long life. • Saw Shaft fitted with 2 heavy duty taper rollar bearing 3226 front and 32224 back for taking heavy load up to 2.5 meter saw. • Internal diameter of the front bearing 130mm & back bearing 120mm. • Heavy duty main table welded M.S, 'C' beam size 2.54 M x 1.37 M. • Main table travel operated by 3 HP motor & gearbox & dia 190mm. 4Nos V-Wheel & 8 No's ball bearing 6212. • Heavy duty transport table (car) consist of welded M.S.'C' Beam size 3.00M X 1.37M. • Transport table travel on calibrated square type rails of 90lbs 18' long 2 No's with 4 No's square wheel & 8 No's ball bearing 6210 (Internal Diameter of the bearing 50 mm). • Extra 2 No's Transport table.