Technical Detail   MACHINE  D 30 Spindle Motor  50 HP/37Kw Blade  2.5m Vertical Travel  1.00m Sawing Depth  0.975m Horizontal Travel  5.00m Sawing Length  3.00m Horizontal Travel Speeds   0.50m to  6m/mn
Technical Detail   Spitting Machine  S24 Spindle Drive Motor  10/15/Hp Blade  600 mm Flanges  250 mm Vertical Travel  425 mm Effective Sawing Depth  160 mm Horizontal Travel (Working for pillar to cutter)  600 mm Cutting Sawing Length  3000 mm     Technical Features • C. I. 1 No's 4" Height Pillar  •  Vertical travel operated by 1 HP motor, gearbox, screw and C.I nut (with depth of cut adjustment) • Saw shaft assembled with 2 No's taper rollar bearing 32214 front and 1 taper rollar bearing 32213 rear for taking heavy load (at extra cost 2 No's angular contec bearing 7214 front) • Internal diameter of the front bearing 70 mm & back bearing 65 mm • Horizontal travel operated by 1 HP brake motor, gearbox, screw and C I nut for long life with counting system through encoder for taking perfect horizontal size (thickness of slab) • Welded M.S Table of "c" beam size : 2.43 x 0.91 m (Foot Size: 8' x 3') • Other size for table size : 6' x 2.5' : ________________ 7' x 2.5' : ________________ 8' x 2.5' : ________________ 10' x 2.5' : ________________ • Table travel on 4 No's wheel assembled with shaft and 6208 bearing (internal diameter of bearing is 40 mm) for taking heavy load with easy movement. • Table travel by rack & pinion system assembled with gear, 1 HPAC/DC variable speed motor for different speed of table according to depth of cut & hardness of stone and 2 No's limit switch for managing length of movement of table.        S36 Spindle Drive Motor  20/25/Hp Blade  900 mm Flanges  250 mm Vertical Travel  725 mm Effective Sawing Depth  300 mm Horizontal Travel (Working for pillar to cutter)  600 mm Cutting Sawing Length  2400 mm
Technical Features • Welded M.S 1 No's 5" Height pillar consisting mild steel plate of 16 mm.  •  Vertical travel operated by 1 HP motor, gearbox, screw and C.I nut (with depth of cut adjustment) • Saw shaft assembled with 2 No's taper rollar bearing 32214 front and 1 taper rollar bearing 32213 rear for taking heavy load (at extra cost 2 No's angular contec bearing 7214 front) • Internal diameter of the front bearing 70 mm & back bearing 65 mm • Horizontal travel operated by 1 HP brake motor, gearbox, screw and C I nut for long life with counting system through encoder for taking perfect horizontal size (thickness of slab) • Welded M.S Table of "c" beam size : 2.43 x 0.91 m (Foot Size: 8' x 3') • Other size for table size : 6' x 2.5' : ________________ 7' x 2.5' : ________________ 8' x 2.5' : ________________ 10' x 2.5' : ________________ • Table travel on 4 No's wheel assembled with shaft and 6208 bearing (internal diameter of bearing is 40 mm) for taking heavy load with easy movement. • Table travel by rack & pinion system assembled with gear, 1 HPAC/DC variable speed motor for different speed of table according to depth of cut & hardness of stone and 2 No's limit switch for managing length of movement of table.