Symbol-bala exports-cutting machines, granite cutting machines, stone cuttine machines, marble polishing machines
bala exports-cutting machines, granite cutting machines, stone cuttine machines, marble polishing machines

42, Skylon Aptt. Opp. Jhanvi Restaurent, Gulbai Tekra Road,

 Ahmedabad -  380 015 Gujarat (INDIA)

Tel : +91-79-5626594,5626595,5623745, Fax : +91-79-5623775.

Email-bala exports-cutting machines, granite cutting machines, stone cuttine machines, marble polishing machines

THE TECHNICAL CHARACTERISTICS :

  1. Fabricated bridge with square bar and roller bearing for easy movement of the bridge.Contrast bearing placed under the bridge.
  2. Disc Unit fabricated and linear way for better performance.
  3. Movement of the disc unit is motorised (AC Drive) and counting systems for various length of slabes size.
  4. Steel bench with strong structure to support big loading.
  5. Manual bench rotation.
  6. n. 2 little columns to set the bench every 90 compelete.
  7. Program for Vertical, Horizontal and Cross movement of the disc unit for various thickness and length of slabs size.
  8. Command panel with movable arm.
  9. Cables chain for all the X. Y. Z. transversal movement. 
  10. Standard safety systems with electronic program.
turn tabel machine-bala exports-cutting machines, granite cutting machines, stone cuttine machines, marble polishing machines

]

Emergency stop for the transversal movement that stops the machines when it is over measure.

]

Machine stops automatically in the end of working cycle.

]

Electronic changable program for the vertical / horizontal & up & down movement of disk unit.

]

Limit switch for all X. Y. Z. transversal movement.

]

Speed regulator for disc unitmovement placed on the camand panel.

]

Accessories required will be supplied at extra cost.

 

Different Electronic Program to cut different dimensions of slab.

 

Alignment of the disc with laser systems.

 

Additional tilting bench .

 

Application of motor with two speeds or high HP.

 

Additional little column to set the Bench as 45 degree cut.

 

Any size of diamond cutter.

Product development is a continuous process. Hence, specification may change without notice.

TECHNICAL CHARACTERISTICS OF TURN TABLE MACHINE

Cutting Operating Length with Disc                        600 mm

Cutting Operating Height (Flange)                          305 mm              

Trolly Length                                                        3000 mm               

Trolly Width                                                         1500 mm               

Width of Trolly with Brackets                                 2100 mm

Minimum Disc Diameter                                        350 mm

Maximum Disc Diameter                                       600 mm

Trolly Elevation                                                     760 mm    

Standard Transverse Travel                                    3000 mm   

Diameter of Disc Setting                                        50 mm

Flange Diameter                                                   170 mm

Disc Motor Rating                                                 20 H.P.

Pump Motor Rating                                               2 H.P.

Water Required                                                    35 Ltr./Per.Min

Total Power                                                          26 H.P.

Approx. Net Weight                                              4500 kg

Product development is a continuous process. Hence, specification may change without notice.

bala exports-cutting machines, granite cutting machines, stone cuttine machines, marble polishing machines bala exports-cutting machines, granite cutting machines, stone cuttine machines, marble polishing machines

For Best Resolution 800/600dpi